Pages

Thursday, May 30, 2013

PTU - Back Off Attitude

This tutorial was written by me on May 30th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit by Krissys Scraps Called Back Off Bitches
You can purchase the kit here

Font Of Choice 

Tube Of Choice - Artwork By Very Many. You must obtain a license from PFD.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 5
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame3
Open paper2. Use your ellipse tool and make a circle on paper2
Copy/Paste as new layer in frame3
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Eye1
Skully Heart2
Leather Bracelet 4
Flower Cupcake2
Glossy Lips3
Flaming Skull1
Flipping The Bird1
Corset3
Barbed Wire Heart3
Flower Cupcake1
Bow4

Open your tube and place to the right of frame2
Now open tube again and place inside frame2
Change mode to value
Duplicate 1x and flip
Merge layer
Duplicate 1x
Filters > Blur > Guassion Blur 

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

PTU - Twilight Luvr

This tutorial was written by me on May 30th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit by Scrappin Krazy Designs called Twilight Luvr
You can purchase at any of the stores she sells at on her blog

Font Of Choice 

Tube Of Choice - FTU Artwork By Zindy Nielson. 

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 9
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open ele17
Open paper5. Use your ellipse tool and make a circle on paper5
Copy/Paste as new layer in ele17
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

ele70
ele44
ele38
ele37
ele25
ele24
ele01
ele32
ele31
ele05
ele06
ele41

Open your tube and place inside ele17

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 8
Offset Y - 8
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

FTU - Precious Friends

This tutorial was written by me on May 30th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Cluster Frame - Precious Friends Cluster Frame By Sweet Temptations 
You can download it here

Font Of Choice 

Tube Of Choice - Artwork By Zndy Nielson. This is a FTU tube by Nielson.
You can find this tube here

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Click On Your Color Picker Tool
Pick A Color From The Cluster
Now go to file
Creat A New Layer
Adanced Options 
Fill With - Forground Color
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Cluster Frame
Open #60bfe5. Use your ellipse tool and make a circle on #60bfe5
Copy/Paste as new layer in Cluster Frame
Erase any unneccessary spots

Open your tube and place inside cluster frame

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 74
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

Wednesday, May 29, 2013

PTU - Back Off

This tutorial was written by me on May 29th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit by Shell's Scraps called Back Off Bitch
You can purchase the kit here

Font Of Choice 

Tube Of Choice - Artwork By Keith Garvey. You must obtain a license to use his work.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 6
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame2
Open paper3. Use your ellipse tool and make a circle on paper3
Copy/Paste as new layer in frame2
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Bag1
Bullet4
Candle1
Corset1
Gun2
Jacket1
Lips1
Mascara1
MotorBike1
Nailpolish1
Skullcross1
Skull Guitar1
Staffy1

Open your tube and place in the middle of elements

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 
Photobucket

Tuesday, May 28, 2013

[FREEBIE] Country Roots Cluster Frames

I used the scrap kit by Jackie's Jewels called Country Roots to make these clusters. Please comment if you snag.


Download HERE

Photobucket

Monday, May 27, 2013

PTU - Country Roots

This tutorial was written by me on May 27th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice

Scrap Kit - PTU Scrap kit by Jackie's Jewels called Country Roots
You can find this scrap kit at any of her stores on her blog

Font Of Choice

Tube Of Choice - Artwork by Keith Garvey. You must obtain a license to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 10
Right click on your layers
Click add layer mask
Then a window will pop up
then click black (full transparency)
Then click add
Edit > Copy
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame2
Open paper7. Use your rectangle tool and make a square on paper7
Copy/Paste as new layer in frame2
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!

Chicken Wire
Grass1
Windmill
Tractor
Vine2 (duplicate 1x)
Sunflower (duplicate 5x)
Lightning Bugs
Barrel
Horse
Jar
WoodPile

Open your tube and place to the right of frame2
Now open tube again and place inside frame2
Change mode to value
Duplicate 3x and flip

Now open tube again and place in center of frame2

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like.

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial.
Photobucket

Saturday, May 25, 2013

FTU - Sin City


This tutorial was written by me on May 25th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - FTU scrap kit by Jackie's Jewels called Sin City
You can download it on her blog here

Font Of Choice 

Tube Of Choice - FTU artwork by Darin Michau

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 3
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame1
Open paper8. Use your ellipse tool and make a circle on paper8
Copy/Paste as new layer in frame1
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Cards
Chair
Coinpile
Jewerly Box
Money & Clip
Money Bag
Money Stack
Poker Chips
Red Diamond (duplicate 3x)
Room Key
Vegas Sign

Open your tube 

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 8
Offset Y - 8
Blur Radius - 15
Opacity - 75
Color - #000000
Allow Resizing

Merge all layers
Now duplicate tag
Filters > Blur > Gaussion Blur > 
Default Settings
Change mode to overlay

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

Friday, May 24, 2013

Memorial Day Sale At Mystical Scraps


Click here
Photobucket

CT Tag For Pandora's Designs

I made this tag using Pandora's Designs newest kit called "Goth Girl Glam"
You can purchase this kit here

I really loved this kit. It had so many elements to choose from, It comes with 50 elements..it took me forever to pick which elements I wanted to use. You want be disappointed with this kit.


Photobucket

NEW Kit In Stores - Pool Party Tagger Size

I had a request to do a pool party themed kit now that today is the last day of school around where I live. This kit contains 30 elements, 17 papers and 4 frames. You can find this kit at any of the stores I sell at on the left of my blog.


Photobucket

Thursday, May 23, 2013

CT Tag Show Off From Cindy

Cindy made me this awesome tag using my steampunk freakshow scrap kit. Thank you so much for my amazing tag.


Photobucket

PTU - Rockin Paws


This tutorial was written by me on March 23, 2013. Please do not claim as your own.  Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------

Mask Of Choice 

Scrap Kit - PTU scrap kit by Ditzy Dezigns called Pink Paws
You can purchase the kit here

Font Of Choice 

Tube Of Choice - Artwork By Maryline Cazenave. You must obtain a license to use this tube.
You can find her work here

Program - Gimp 2.6..but any program will do.

Template - Template 263 By Millie
You can download it here
---------------------------------------------

Open New Canvas
I did 900x900. You can resize it at the end

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 5
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------

Open New Canvas

Open Your Template
Delete The Credits

Right click on paper 9
Extract it and put it in your patterns folder in gimp 2.6 folder

Use your select by color tool
with the select by color..click on layer 1
Edit > Fill With Pattern 

Right click on paper 10
Extract it and put it in your patterns folder in gimp 2.6 folder

Use your select by color tool
with the select by color..click on layer 2
Edit > Fill With Pattern 

Right click on paper 4
Extract it and put it in your patterns folder in gimp 2.6 folder

Use your select by color tool
with the select by color..click on layer 5
Edit > Fill With Pattern 

Right click on paper 3
Extract it and put it in your patterns folder in gimp 2.6 folder

Use your select by color tool
with the select by color..click on layer 6
Edit > Fill With Pattern 

Right click on paper 12
Extract it and put it in your patterns folder in gimp 2.6 folder

Use your select by color tool
with the select by color..click on raster 4
Edit > Fill With Pattern 
----------------------------------------------------------------

Now that the hard part is over..you are ready to add elements and your tube

Add elements and use this drop shadow with these settings

Bird
Bowl2
Dog Food
Dog House
Fence
Flower2
Flower3
Grass
Paw Print 1
Ribbon2
Tree

Drop Shadow - Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Open tube and place to the left of the elements

Add Copyright!!

Add Name!!

Merge All Layers!

Save!

Enjoy!!

Photobucket

Tuesday, May 21, 2013

PTU - A Gypsy's Revenge

This tutorial was written by me on May 21st, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU Scrap Kit Called A Gypsy's Revenge By Jackie's Jewels
You can purchase this kit at any of the stores she sells at on her blog

Font Of Choice 

Tube Of Choice - FTU artwork Of Cris Ortega

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 8
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame2
Open paper6. Use your rectangle  tool and make a square on  paper6
Copy/Paste as new layer in frame2
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Bird Cage
Black Cat
Bottle
Candle2
Coffin
Crow
Crystal Ball
Feather1 (duplicate 1x)
Fog
Grass (duplicate 1x)
Group Of Skulls (duplicate 1x)
Ivy1 (duplicate 1x)
Moon
SpellBook1
Tree2 (duplicate 1x)

Open your tube and place in the middle

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 8
Offset Y - 8
Blur Radius - 15
Opacity - 78
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

A Gypsys Revenge Snags

I used Jackie's Jewels scrap kit called A Gypsy's Revenge. This is a beautiful kit. You can find this scrap kit on her blog.

Tag For Jackie:


Some snags for you. Please comment if you snag any!!!






Photobucket

Monday, May 20, 2013

New Kit In Stores - Summer's End

I didn't know if I wanted to release this kit this month or wait till next month. I just couldn't wait any longer to release it. This kit contains 43 elements, 15 papers and 3 frames for all those summer related designs. You can find this kit in any of my stores that is to the left of my blog.


Photobucket

FTU - Enamorte Yellow

This tutorial was written by me on May 20th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - FTU Scrap Kit called Inspired By Enamorte by A Space Between
You can download this kit here

Font Of Choice 

Tube Of Choice - Artwork By Elias Chatzoudis. You must obtain a license to use his work.
Visit Elias store here

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 5
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open element35

Open These Elements and use the same dropshadow as above and resize to your liking!!!

3
33 (duplicate 1x)
27
13
38
8
37
13 (duplicate 1x)
24 (duplicate1x)
11
20
26
34

Open your tube and place in the middle

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 70
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 


Photobucket

Saturday, May 18, 2013

PTU - Fairy Fantasy

This tutorial was written by me on May 18th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU Scrap Kit Called Fairy Fantasy by Scottish Butterfly
You can purchase this kit at any of the stores she sells at on her blog

Font Of Choice 

Tube Of Choice - Artwork of Ismael Rac. You must obtain a license to use his work. 

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 3
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame1
Open paper9. Use your ellipse tool and make a circle on paper9
Copy/Paste as new layer in frame1
Erase any unneccessary spots if needed

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Bubbles
Doodle1
Flower2 (duplicate 3x)
Flower Bunch
Grass (duplicate 1x)
Hummingbird
Magical Tree (duplicate 1x)
Mushroom1
Mushroom2
Sparkles1
Sparkles2

Open your tube and place in the middle

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 


Photobucket

CT Call


Photobucket

PTU - Wish You Were Here Tutorial + Cluster Frame



This tutorial was written by me on May 18th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice

Scrap Kit - PTU Scrap Kit Called Wish You Were Here By Jackie's Jewels
You can find this kit on her blog

Font Of Choice

Tube Of Choice - Artwork By VeryMany. You must obtain a license to use this tube.
Visit PFD here.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 5
Right click on your layers
Click add layer mask
Then a window will pop up
then click black (full transparency)
Then click add
Edit > Copy
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Window
Open paper7. Use your rectangle tool and make a square on paper7
Copy/Paste as new layer in Window
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Basket Of Letters
Bear
Flower Cluster
Lantern
Letter
Plant3
Umbrella
Violin
WordArt Swirl

Open your tube and place it to the right
Open up close up of tube and place on the inside of the window
Change mode to value

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like.

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial.


Here is a cluster frame I made as well. Please comment if you download.

DOWNLOAD HERE

Here is a tag I made using the cluster frame





Photobucket

Friday, May 17, 2013

PTU - Beach Party

This tutorial was written by me on May 17th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU Scrap Kit Called Beach Party By Scrappin Krazy Designs
You can purchase this kit at any of the stores she sells at on her blog

Font Of Choice 

Tube Of Choice - Artwork By Ismael Rac. You must obtain a license to use this tube. 

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 10
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open ele16
Open paper3. Use your rectangle tool and make a square on paper3
Copy/Paste as new layer in ele16
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

ele01
ele05
ele12
ele18
ele33
ele44
ele50
ele55
ele58

Open your tube and place to the right. 

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Photobucket

PTU - Secret Escape

This tutorial was written by me on May 17th, 2013. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU Scrap Kit Called Secret Escape By Krissys Scraps
You can purchase this kit here

Font Of Choice 

Tube Of Choice - FTU artwork By Nene Thomas

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Open Paper 1
Right click on your layers
Click add layer mask
Then a window will pop up 
then click black (full transparency)
Then click add
Edit > Copy 
Edit > Paste
On Layers > click on floating selection
Then right click on layers
scroll down to anchor layer
Delete first layer!!!

You should have a mask..then a black square next to it on your layers.
Image > Merge Visible Layers 
Box should pop up..click clipped to image > Merge

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame1
Open Scene paper1. Use your ellipse tool and make a circle on scene paper1
Copy/Paste as new layer in frame1
Erase any unneccessary spots

Open These Elements and use the same dropshadow as above and resize to your liking!!!

Blue Grass
Butterfly1
Glittered Heart Flowers (duplicate 1x)
Magical Lghts
Moss1
Natural Bloom
Sparkles
Squirral
Wooden Chair

Open your tube and place in the middle

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 73
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 


Photobucket