Pages

Tuesday, December 30, 2014

PTU - Elegant Party

This tutorial was written by me on December 31, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit Elegant Party By Crystals Creations
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper5

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame3
Now open Paper11 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:
ep_ee55
ep_ee41
ep_ee39
ep_ee59
ep_ee25

Now dropshadow your elements with these settings.
Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Wednesday, December 17, 2014

PTU - Christmas Fireplace

This tutorial was written by me on December 17, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit Christmas In The Fireplace By FWtags Creations
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper6

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame3
Now open Paper2 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

FwTagsChristmasInTheFirePlaceELEMENT (3)
FwTagsChristmasInTheFirePlaceELEMENT (57)
FwTagsChristmasInTheFirePlaceELEMENT (59)
FwTagsChristmasInTheFirePlaceELEMENT (62)
FwTagsChristmasInTheFirePlaceELEMENT (63)
FwTagsChristmasInTheFirePlaceELEMENT (64)
FwTagsChristmasInTheFirePlaceELEMENT (66)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Tuesday, December 2, 2014

PTU - Winter Forest

This tutorial was written by me on December 2, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit Christmas In The Wnter Forest By Disturbed Scraps
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Andy Cooper. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper14

-----------------------------------------------------------------

Ready...
Set...
Go...

Open DS - CWF Element (86)
Now open Paper10 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

DS - CWF Element (10)
DS - CWF Element (15)
DS - CWF Element (32)
DS - CWF Element (33)
DS - CWF Element (34)
DS - CWF Element (35)
DS - CWF Element (45)
DS - CWF Element (59)
DS - CWF Element (61)
DS - CWF Element (65)
DS - CWF Element (64)
DS - CWF Element (67)
DS - CWF Element (80)
DS - CWF Element (88)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Sunday, November 30, 2014

PTU - Anniversary

This tutorial was written by me on November 30, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit Anniversario By Bibi's Collections
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Di_Halim. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper7

-----------------------------------------------------------------

Ready...
Set...
Go...

Open BIBI ANNIVERSARY COLLAB ELEMS (50)
Now open BIBIANNIVERSARY COLLAB PAPER (5) and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

BIBI ANNIVERSARY COLLAB ELEMS (43)
BIBI ANNIVERSARY COLLAB ELEMS (67)
BIBI ANNIVERSARY COLLAB ELEMS (5)
BIBI ANNIVERSARY COLLAB ELEMS (47)
BIBI ANNIVERSARY COLLAB ELEMS (40)
BIBI ANNIVERSARY COLLAB ELEMS (3)
BIBI ANNIVERSARY COLLAB ELEMS (10)
BIBI ANNIVERSARY COLLAB ELEMS (6)
BIBI ANNIVERSARY COLLAB ELEMS (63)
BIBI ANNIVERSARY COLLAB ELEMS (88)
BIBI ANNIVERSARY COLLAB ELEMS (87)
BIBI ANNIVERSARY COLLAB ELEMS (82)
BIBI ANNIVERSARY COLLAB ELEMS (65)
BIBI ANNIVERSARY COLLAB ELEMS (69)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Monday, November 24, 2014

PTU - Christmas Lily

This tutorial was written by me on November 24, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit Christmas Lily By Kizzed By Kelz
You can purchase this kit  HERE

Font Of Choice 

Tube Of Choice -  Artwork By Vi_Nina. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper14

-----------------------------------------------------------------

Ready...
Set...
Go...

Open KBK_ChristmasLilly (1)
Now open KBK_ChristmasLilly (1) and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

KBK_ChristmasLilly (108)
KBK_ChristmasLilly (115)
KBK_ChristmasLilly (34)
KBK_ChristmasLilly (43)
KBK_ChristmasLilly (46)
KBK_ChristmasLilly (50)
KBK_ChristmasLilly (6)
KBK_ChristmasLilly (68)
KBK_ChristmasLilly (76)
KBK_ChristmasLilly (77)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Tuesday, November 18, 2014

PTU - Merry

This tutorial was written by me on November 18, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Merry By Bibi's Collections
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Vi_Nina. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used Paper9

-----------------------------------------------------------------

Ready...
Set...
Go...

Open BIBIMERRY ELEMS (82)
Now open Paper3 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside the frame

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

BIBIMERRY ELEMS (71)
BIBIMERRY ELEMS (72)
BIBIMERRY ELEMS (73)
BIBIMERRY ELEMS (80)
BIBIMERRY ELEMS (85)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Saturday, November 15, 2014

PTU - American Native

This tutorial was written by me on November 15, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called American Native By Designs By Joan
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used PAPER (4)

-----------------------------------------------------------------

Ready...
Set...
Go...

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

ELEMDBJ19
ELEMDBJ124
ELEMDBJ32
ELEMDBJ57
ELEMDBJ92
ELEMDBJ123
ELEMDBJ130
ELEMDBJ128
ELEMDBJ129
ELEMDBJ137
ELEMDBJ109
ELEMDBJ100
ELEMDBJ12

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 







Saturday, November 8, 2014

PTU - Blondie Oldie

This tutorial was written by me on November 8, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Oldie Boldie By Bibi's Collections
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By The Hunter. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used BIBIOLDIEGOLDIE PAPER (4)

-----------------------------------------------------------------

Ready...
Set...
Go...

Open BIBIOLDIEBOLDIE ELEMS (36)
Now open BIBIOLDIEGOLDIE PAPER (11) and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside BIBIOLDIEBOLDIE ELEMS (36)

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

BIBIOLDIEBOLDIE ELEMS (28)
BIBIOLDIEBOLDIE ELEMS (30)
BIBIOLDIEBOLDIE ELEMS (31)
BIBIOLDIEBOLDIE ELEMS (32)
BIBIOLDIEBOLDIE ELEMS (40)
BIBIOLDIEBOLDIE ELEMS (47)
BIBIOLDIEBOLDIE ELEMS (52)
BIBIOLDIEBOLDIE ELEMS (53)
BIBIOLDIEBOLDIE ELEMS (64)
BIBIOLDIEBOLDIE ELEMS (8)
BIBIOLDIEBOLDIE ELEMS (71)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Wednesday, November 5, 2014

PTU - Cold As Ice


This tutorial was written by me on November 5, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Cold As Ice By A Tagger's Scrap
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By  antheilo . You must obtain a license from TPP to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used paper15

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame6
Now open Paper6 and use your rectangle tool and make a square on the paper
Copy and paste as new layer and paste inside Frame6

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

Angel
Chair
Candle
House
Reindeer
Music
Snow
Snow Trees
Sparkle Deco
Water

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Tuesday, November 4, 2014

CT Tags - Tasha's Playground - Winter Woods

I used Tasha's new winter kit called Winter Woods. It has 70 beautiful winter elements for all kinds of tags. You can find this kit at any of Tasha's stores on her blog here


Here are two tags that I made with the kit. 




Sunday, November 2, 2014

PTU - Nurse Someday

This tutorial was written by me on November 2, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Nurse By Bib's Collections
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Di_Halim. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

----------------------------------------------------------------

Ready...
Set...
Go...

Open BIBINURSE ELEMS (38)
Now open Paper9 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside BIBINURSE ELEMS (38)

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

BIBINURSE ELEMS (19)
BIBINURSE ELEMS (27)
BIBINURSE ELEMS (31)
BIBINURSE ELEMS (33)
BIBINURSE ELEMS (42)
BIBINURSE ELEMS (44)
BIBINURSE ELEMS (80)
BIBINURSE ELEMS (85)
BIBINURSE ELEMS (89)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 80
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 






PTU - Winter Frost

This tutorial was written by me on November 2, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Winter Tea By Drea's Creations
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Misticheskaya. I got this at SATC. But the site has now closed.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used paper2

-----------------------------------------------------------------

Ready...
Set...
Go...

Open DC_89
Now open Paper5 and use your rectangle tool and make a square on the paper
Copy and paste as new layer and paste inside DC_89

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

DC_26
DC_33
DC_38
DC_39
DC_41
DC_44
DC_51
DC_53
DC_54
DC_57
DC_68
DC_86

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 80
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 







Saturday, November 1, 2014

PTU - Frozen Magic



This tutorial was written by me on November 1, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Frost Girl By Whisper In The Wind
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used paper7

-----------------------------------------------------------------

Ready...
Set...
Go...

Open Frame1
Now open Paper6 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside Frame1

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

FG El 15
FG El 19
FG El 3
FG El 31
FG El 35
FG El 72
FG El 84
FG El 87
FG El 88
FG El 95
FG El 96

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Thursday, October 30, 2014

PTU - Sexy Autumn

This tutorial was written by me on October 30, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Sexy Autumn By Kizzed By Kelz 
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used paper26

-----------------------------------------------------------------

Ready...
Set...
Go...

Open KBK_SexyAutumn (115)
Now open Paper4 and use your rectangle tool and make a square on the paper
Copy and paste as new layer and paste inside KBK_SexyAutumn (115)

Now open up the close up of your tube and c/p inside the frame. 

The elements I used were:

KBK_SexyAutumn (101)
KBK_SexyAutumn (103)
KBK_SexyAutumn (29)
KBK_SexyAutumn (30)
KBK_SexyAutumn (32)
KBK_SexyAutumn (56)
KBK_SexyAutumn (68)
KBK_SexyAutumn (78)
KBK_SexyAutumn (96)
KBK_SexyAutumn (98)

Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial. 

Monday, October 27, 2014

PTU - Thanksgiving Night


This tutorial was written by me on October 27, 2014. Please do not claim as your own. Any resemblance to any other tutorial is purely coincidental.
------------------------------------------------
Mask Of Choice 

Scrap Kit - PTU scrap kit called Thanksgivng Night By Bibi's Collections
You can purchase this kit here

Font Of Choice 

Tube Of Choice -  Artwork By Danny Lee. You must obtain a license from S&Co to use this tube.

Program - Gimp 2.6..but any program will do.

--------------------------------------------

Open New Canvas
I did 650x650.you can resize it at the end if you would like.

Open Mask
Right click on your layers 
Go down to alpha by selection
Edit > fill w/ BG color - Make sure color is #FFFFFF

Add your paper of choice. I used paper12

-----------------------------------------------------------------

Ready...
Set...
Go...

Open BIBITHANKSGIVINGNIGHT ELEMS (3)
Now open Paper3 and use your ellipse tool and make a circle on the paper
Copy and paste as new layer and paste inside BIBITHANKSGIVINGNIGHT ELEMS (3)

The elements I used were:

BIBITHANKSGIVINGNIGHT ELEMS (118)
BIBITHANKSGIVINGNIGHT ELEMS (12)
BIBITHANKSGIVINGNIGHT ELEMS (14)
BIBITHANKSGIVINGNIGHT ELEMS (15)
BIBITHANKSGIVINGNIGHT ELEMS (24)
BIBITHANKSGIVINGNIGHT ELEMS (29)
BIBITHANKSGIVINGNIGHT ELEMS (33)
BIBITHANKSGIVINGNIGHT ELEMS (47)
BIBITHANKSGIVINGNIGHT ELEMS (49)
BIBITHANKSGIVINGNIGHT ELEMS (69)
BIBITHANKSGIVINGNIGHT ELEMS (90)
BIBITHANKSGIVINGNIGHT ELEMS (95)


Now dropshadow your elements with these settings.

Filters, Light And Shadows...DropShadow
Offset X - 9
Offset Y - 9
Blur Radius - 15
Opacity - 76
Color - #000000
Allow Resizing

Now resize your tag to 600x600 if you would like. 

When you are happy with your tag..
Add Copyright!!
Add Name!!
Merge All Layers!
Save!
Enjoy!!

Hope you enjoyed my tutorial.